TJG Fixed Lifting Feeder
DESCRIPTION
TJG Fixed Lifting Feeder consists of two parts, the lifting machine and base. The lifting machine is composed of the rack, hydraulic lifting system and the hopper-turning mechanism. The material tank and the hopper of the lifting machine shall be connected when before operation. And then start the control rod for lifting the hopper and the tank together. After starting the control rod for turning, the material tank will turn 180 degrees to a position with the bottom of the tank upward and the material can be easily fed into the required equipment.
Technical Parameter
Model&specs\Parameter | H | A | D | H1 |
TJG-50 | 2050 | 650 | Φ485 | 2900 |
TJG-100 | 2050 | 750 | Φ590 | 2900 |
Technical Parameter
Name | Volume (kg) |
Specification (dia×high) (mm) |
Wall Thichness (mm) |
Material tank | 50 | Φ485×460 | 0.8 |
100 | Φ590×550 | 0.8 | |
Special trolley for material tank | 50-100 | Φ500×600 |
- 2016-08-06 > Application of eight kinds of drying equipment in chemical and pharmaceutical industry
- 2016-08-06 > Application of spray drying desulphurization technology in protecting ecological environment
- 2016-08-06 > Comparison of Powder Rate between Special Application and High Speed Spray Drying Machine of Traditional Chinese Medicine
- 2016-08-06 > Common Fault and Maintenance of Belt Dryer in Operation
- 2016-08-06 > Application range and type selection of strip dryer
- 2016-08-06 > Development Status and Characteristics of High Efficiency Mixer for Calcium Carbonate Industry
- 2016-08-06 > Safe use of hot air circulation oven and four key points for attention
- 2016-08-06 > There will also be a new trend in the rice dryer market
- 2016-08-05 > Design Methods of Four Technologies for Rotating Flash Drying Machine